Speedbox 3.0 Tuning Chip for Bosch eBike / Electric Bike

OR SALE OUR USED SPEED BOX 3.0 FOR BOSCH MOTORS
 
IN FULL WORKING ORDER, NO INSTRUCTIONS, BUT VERY EASY TO FIT SEE YOUTUBE VIDEO LINK BELOW
 
COST US WHEN NEW £250
FREE SHIPPING IS AVAILABLE ON THIS PARTICULAR ITEM ALSO. 
 
THANKS
 
 
Compatible with displays: KIOX, INTUVIA, NYON, PURION and COBI 
Compatible with motors: Active Line, Active Line Plus, Performance Line, Performance Line CX Line and Performance Line Speed, Cargo Line including motors of the 4th generation. 
Not compatible with 2022 Bosch Smart System 
Activation: by pressing WALK / + - + - / WALK +
 
How does SpeedBox 3.0 work?
The tuning kit can be activated directly on your bike’s display.  After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.
To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + - + -  buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed of an electric assistance by changing modes: Turbo - EMTB - Tour - Eco - Tour - EMTB - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h, 9,9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.
When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.
 HERE IS THE LINK OF VIDEO OF HOW TO EASILY INSTALL THIS CHIP 
https://youtu.be/Pbtolt8EnEg